LIVE: How to Pipe Buttercream Roses
We’re LIVE to show you how to pipe a buttercream rose! Check out these related links:How to Make Icing Roses: http://bit.ly/2wEGVNMStiff Decorator Icing: http://bit.ly/2HQzyoSIcing Colors: http://bit.ly/2HY1FSYPre-cut Icing Squares: http://bit.ly/2wGUrjXPiping Bags & Tips: http://bit.ly/3c6o7aDPosted by Wilton Cake Decorating on Tuesday, February 25, 2020
Instantly elevate your dessert with an elegant buttercream rose. Made by layering petals on a flower nail, this blooming buttercream flower is easy to make once you get the hang of it! Use a standard petal tip and stiff buttercream frosting to make a whole garden of roses for your next baking project.
Step 1 Make the rose base, using tip 12 and Flower Nail #7. Hold the bag straight up, the end of tip 12 slightly above the center of your waxed paper-covered flower nail, which is held in your other hand. Using firm and steady pressure, squeeze out a heavy base of frosting, remembering to keep your tip buried as you squeeze. Gradually raise the tip, and decrease the pressure.
Step 2 Stop pressure, pull up and lift away. The rose base should be 1 1/2 times as high as the rose tip opening.
Step 3 Make the center bud, using tip 104. Hold nail containing base in your left (right) hand and bag with rose tip 104 in right (left) hand. Bag should be at a 45° angle to the flat surface of the nail and in the 4:30 (7:30) position. The wide end of the tip should touch the cone of the frosting base at or slightly below the midpoint, and the narrow end of the tip should point up and angle slightly inward.
Step 4 Now you must do 3 things at the same time: squeeze the bag, move the tip and rotate the nail. As you squeeze the bag, move the tip up from the base, forming a ribbon of frosting. Slowly turn the nail counterclockwise (clockwise for lefties) to bring the ribbon of frosting around to overlap at the top of the mound, then back down to starting point.
Step 5 Move your tip straight up and down only; do not loop it around the base. Now you have a finished center bud.
Step 6 Make the top row of 3 petals. Touch the wide end of tip to the midpoint of bud base, narrow end straight up.
Step 7 As you turn the nail the up and down motion of the tip will make a half circle-shaped upright petal. Wide end of tip must touch the rose base so that petal will attach. Move tip up and down to the midpoint of mound, forming the first petal.
Step 8 Start again, slightly behind end of first petal, and squeeze out second petal. Repeat for the third petal, ending by overlapping the starting point of the first petal. Rotate the nail 1/3 turn for each petal.
Step 9 Make the middle row of 5 petals. Touch the wide end of tip slightly below center of a petal in the top row. Angle the narrow end of tip out slightly more than you did for the top row of petals. Squeeze bag and turn nail moving tip up, then down, to form first petal.
Step 10 Repeat for a total of 5 petals, rotating the nail 1/5 turn for each petal.
Step 11 The last petal end should overlap the first’s starting point.
Step 12 Make the bottom row of 7 petals. Touch the wide end of tip below the center of a middle row petal, again angling the narrow end of tip out a little more. Squeeze bag and turn nail to end of fingers, moving tip up, then down to form first petal.
Step 13 Repeat for a total of 7 petals, rotating the nail 1/7 turn for each petal.
Step 14 The last petal end should overlap the first’s starting point. Slip waxed paper and completed rose from nail.